An HRV recovers heat from ventilation air. An ERV also transfers some moisture between the outgoing and incoming air streams. That moisture difference matters, but “Ontario is cold” is not enough information to choose a system for every home.
Compare the home’s winter moisture pattern, summer conditions, ventilation needs and proposed installation. Then ask how the selected model will be ducted, controlled, balanced and maintained. A convincing equipment recommendation should come with a convincing plan for the house.
What the two systems do
Both bring outdoor air in and exhaust indoor air while recovering energy through a heat-exchange process. They are ventilation equipment; they do not simply circulate room air like a furnace fan.
Health Canada’s Ventilation and the Indoor Environment explains that an ERV can retain some outgoing moisture during cold, dry conditions. During warm, humid weather, it can transfer some incoming moisture toward the exhaust stream. Those effects can help with seasonal moisture management, but they depend on conditions and the system.
An ERV does not add water from a reservoir or water supply as a humidifier does, or promise a fixed indoor humidity. An HRV is not a complete remedy for every damp basement. Separate the ventilation strategy from plumbing leaks, water entry and other moisture sources.
Build a two-season brief before comparing quotes
Prepare a short description of both seasons. Use actual observations where possible; if you have not experienced summer in the house, label that unknown.
On a phone, swipe the table sideways.
| Design question | Winter information | Summer information |
|---|---|---|
| Moisture pattern | Readings, temperature, window condensation or dryness concerns | Readings, damp areas and whether AC is used |
| Household use | Occupancy and frequent moisture-producing activities | Occupancy and window-opening habits |
| Existing ventilation | Model, controls, apparent faults and available service records | Same equipment’s operation and complaints |
| Building changes | New windows, air sealing, renovations | Changes affecting cooling or moisture |
| Main goal | What specific problem should improve? | What must not become worse? |
This is a design brief, not a way to calculate required airflow. A house can have dry bedrooms and a damp basement at the same time. Giving the designer both facts is better than reducing the whole home to one humidity reading.
When moisture changes the discussion
Persistent winter condensation raises a different question from persistent low measured humidity. Health Canada’s guidance describes how winter ventilation with dry outdoor air can reduce indoor humidity, and how ERV moisture recovery can help limit winter drying. It also describes ERV benefits where incoming summer air is humid.
Those are reasons to examine the alternatives, not automatic product assignments. Ask what else may explain the complaint and whether the ventilation design addresses it. A cold surface, a water leak or an incorrectly operating existing system can complicate the picture.
Do not switch off required ventilation or change system settings indefinitely to chase a more comfortable humidity reading. Obtain model-specific operating guidance and resolve the reason for the complaint.
The installation questions that belong beside the model number
A quote should explain where air will be supplied and exhausted, how the ventilator interacts with existing equipment, and what controls the household will use. Ask what ductwork is retained, changed or newly installed. If the furnace fan needs to operate with the ventilation system, have that interaction explained rather than assuming it.
Ask how the selected model handles cold-weather operation, what maintenance access it needs and which tasks belong to the owner. These are model and design questions; two products with the same nominal airflow label may not have identical behaviour or installation needs.
Finally, ask what verification and handoff are included. “Installed and running” and “documented to deliver the designed ventilation” are different descriptions. Request an explanation of the intended airflow, how it will be checked and what records you will receive. Ask which model and design requirements the measured airflow will be checked against.
Worked example: compare two incomplete proposals fairly
Consider two hypothetical quotes for replacing a failed ventilator. Proposal A specifies an HRV and says it will reuse the ducts. Proposal B specifies an ERV and includes new controls and an airflow report. Neither description, by itself, establishes the right choice.
On a phone, swipe the table sideways.
| Question to resolve | Ask Proposal A | Ask Proposal B |
|---|---|---|
| Why this recovery type? | Which seasonal moisture evidence supports HRV? | Which evidence supports ERV, including winter concerns? |
| Existing ducts | How will their condition and suitability be checked? | Which ducts are reused, changed or excluded? |
| Controls | What is included and how will the owner operate it? | What do the new controls do, and what system interactions remain? |
| Verification | Is airflow verification included despite not being listed? | What does the report measure and compare against? |
| Remaining moisture problem | What does the proposal leave unresolved? | What does the proposal leave unresolved? |
Proposal A may include more than its summary states. Proposal B may be better documented yet still select the wrong equipment for the home. Use the answers to make the scopes comparable before deciding that one label or one longer quote is superior.
If a contractor cannot answer a question immediately, ask for the design clarification in writing. Missing information is a reason to resolve the scope, not proof of dishonest work.
Replacement is an opportunity to check assumptions
Replacing an HRV with another HRV may be appropriate, but the old installation is not proof that every detail remains suitable. Household occupancy, renovations and the home’s moisture pattern may have changed.
Changing to an ERV also deserves more than a like-sized-box comparison. Ask about the proposed model, connections, controls, operation and design rationale. Do not assume the old core can be exchanged for a different type without manufacturer approval.
For a new house or major renovation, coordinate this decision before finishes constrain duct routes. Our custom-home HVAC planning guide explains why equipment, distribution and the building should be considered together.
Common questions
Does an ERV replace a dehumidifier?
Do not assume that it will. Moisture transfer in ventilation air is different from independently removing moisture to meet a room’s needs. Ask how the complete design addresses the actual moisture load.
Does an HRV or ERV replace a furnace filter?
No. Ventilation and filtration perform different jobs. Obtain the care instructions for each piece of equipment rather than treating one accessory as a replacement for the other.
Can I choose from a climate map?
A climate map can start a conversation. It does not document your home’s occupancy, seasonal readings, duct arrangement or selected model’s operation. Those details still need a design answer.
Bring a two-season picture to the assessment
Gather the existing model and controls, any service records, seasonal observations and your main concern. Contact us using the buttons below to discuss the appropriate next step. Ask for the reasoning behind the proposed system as well as the equipment name.
Sources and reading notes
Sources checked October 19, 2026. This guide explains planning questions, not a diagnosis or equipment selection for an individual home. Worksheets and hypothetical examples are original decision aids; they are not 519 job reports. Follow the actual equipment instructions and obtain advice for your home.

